Skip to main content

WAN IP Setup

Description

One o the first steps in RTU/Datalogger setting up is to prepare connection to internet or a specific private network over Ethernet or GSM. This article describes WAN over Ethernet connection setup.

image-1601990457991.png

Setting WAN IP

  1. Go to Network → Interfaces → Edit (WAN)
  2. Select protocol - Static address and click on Switch protocol
  3. Enter addresses of your WAN network and click on Save & Apply

Example:

image-1601989521974.png

Video how to setup WAN IP address:

 

 

 

Back to top