Firmware 1.5 and 1.8 configurations comparison
Description
Since 1.5 firmware version some configuration parameters stopped existing, new ones were added, others simply changed their name. All these changes might be a problem when you want to import old configuration file into WCC Lite with a new firmware. This article is aimed to provide differences between different firmware versions for such protocols as Modbus Master, IEC 608705103 Master and Internal Data.
MODBUS Master
Device sheet:
|
Parameter |
1.5 |
1.8 |
|
mode |
- |
+ |
|
ascii |
+ |
- |
|
keep_alive_timeout |
- |
+ |
|
event_history_size |
+ |
- |
|
update |
- |
+ |
+ (exists)
- (does not exist)
|
Description of a Parameter |
1.5 |
1.8 |
|
Parameter |
Parameter |
|
|
IP address of TCP slave device |
host |
ip |
|
Number of requests, before link is considered lost (device status signals are changed) and reconnect attempt will be issued |
poll_retry_count |
retry_count |
|
RS485 delay between read and write operations in milliseconds |
poll_delay_ms |
serial_delay |
Signal sheet:
|
Parameter |
1.5 |
1.8 |
|
scan_rate_ms |
+ |
- |
+ (exists)
- (does not exist)
|
Description of a Parameter |
1.5 |
1.8 |
|
Parameter |
Parameter |
|
|
Size of this signal’s log in Event log. |
log_size |
log |
IEC 608705103 Master
Device sheet:
|
Parameter |
1.5 |
1.8 |
|
event_history_size |
+ |
- |
|
serial_delay |
+ |
- |
|
retry_delay_ms |
- |
+ |
+ (exists)
- (does not exist)
|
Description of a Parameter |
1.5 |
1.8 |
|
Parameter |
Parameter |
|
|
Polling interval in milliseconds. Time frame between two telegrams from master. |
poll_interval_ms |
scan_rate_ms |
|
Response timeout in milliseconds |
poll_timeout_ms |
timeout_ms |
|
Number of retries of failed requests before announcing that device is in Error state |
poll_retry_count |
retry_count |
Signal sheet:
|
Description of a Parameter |
1.5 |
1.8 |
|
Parameter |
Parameter |
|
|
Size of this signal’s log in Event log. |
log_size |
log |
WCC Lite internal signals
Device sheet:
|
Parameter |
1.5 |
1.8 |
|
name |
- |
+ |
|
device_alias |
- |
+ |
+ (exists)
- (does not exist)
Signal sheet:
job_todo comparison:
|
job_todo |
1.5 |
1.8 |
|
gsm |
- |
+ |
|
date |
- |
+ |
tag_job_todo comparison:
|
job_todo |
tag_job_todo |
1.5 |
1.8 |
|
gpio |
GPIO number |
+ |
- |
|
digital-input |
- |
+ |
|
|
rs232-enable |
- |
+ |
|
|
sim-select |
- |
+ |
|
|
sim-detect |
- |
+ |
|
|
modem-reset |
- |
+ |
|
|
board |
active-sim-iccid |
+ |
- |
|
active-sim |
+ |
- |
|
|
duid |
+ |
- |
|
|
mac-address |
- |
+ |
|
|
uptime |
- |
+ |
|
|
fw-version |
- |
+ |
|
|
hw-version |
- |
+ |
|
|
modem-type |
- |
+ |
|
|
led |
green-signal1 |
- |
+ |
|
green-signal2 |
- |
+ |
|
|
green-signal3 |
- |
+ |
+ (exists)
- (does not exist)
|
Description of a Parameter |
1.5 |
1.8 |
||
|
job_todo |
tag_job_todo |
job_todo |
tag_job_todo |
|
|
GSM RAT number |
board |
gsm-current-rat-num |
gsm |
rat-number |
|
GSM IMSI number |
gsm-imsi |
imsi-number |
||
|
GSM Internet status |
gsm-internet-status |
internet-status |
||
|
GSM operator number |
gsm-operator-num |
operator-number |
||
|
GSM roaming status |
gsm-roaming-status |
roaming-status |
||
|
GSM signal quality |
gsm-signal-quality-num |
signal-quality |
||
|
WLAN LED |
led |
wcclite:blue:wlan |
led |
blue-wlan |
|
ETH0 LED |
wcclite:green:eth0 |
green-eth0 |
||
|
ETH1 LED |
wcclite:green:eth1 |
green-eth1 |
||
|
Fault LED |
wcclite:red:fault |
red-fault |
||
|
Relay LED & Output |
wcclite:relay |
gpio |
relay |
|