7 Tags
Single point
Commonly used in storing digital states single point values have only one bit of information. The value of such tags can be either one or zero. On the internal web of WCC Lite states of this type of tags are shown in colored boxes with customisable labels.
| Value | Representation |
| 0 | OFF |
| 1 | ON |
Double point
Double-point signals contain two bits of information that allow four different states, therefore they contain additional information compared to single-point ones. The INDETERMINATE state might, for example, mean that part of the equipment has been turned off or a mechanical part which does the switching has stuck between states. ERROR state might mean that both contacts are connected and there might be a short circuit in the equipment.
| Value | Representation |
| 00 | INDETERMINATE |
| 01 | OFF |
| 10 | ON |
| 11 | ERROR |