Search Results

Tags have different functionalities for both Master and Slave simulations. Slave: Tags in Slave simulations can be created to simulate data that the slave will send out to the master client. Master: Tags in master simulations are mostly used to forma...

Initial Setup. First connect to a network from which the IEC104 Slave device is reachable. When you're connected to the network it's time to open The Vinci Software and start configuring the SCADA parameters. The Vinci Expert will simulate the Master (Client)...

Initial Setup The first thing to do when setting up is to connect the IOMod to the computer using The Vinci Expert to convert from RS485 to USB. You need to connect it like in the diagram depicted below. Connect The Vinci Device to the computer using a mic...

General IOMOD modules Step file -> Download IOMOD 8DI4RO IOMOD 8DI8DO IOMod 16DI IOMOD 8AI IOMOD 4Cs4Vs IOMOD Meter IOMOD FPI IOMOD HT Datasheet -> Download IOMOD 4RTD IOMod T Datasheet -> Download CLMod V...

The Vinci Expert Manual -> Download

WCCLite manual for version 1.11.0 Manual --> Download WCCLite manual for version 1.10.0 Manual --> Download WCCLite manual for version 1.9.3 Manual --> Download WCCLite manual for version 1.9.0 Manual --> Download WCCLite+ manual for version 1.1.18 Ma...

The Vinci Software ->  Download More information about changes in software can be found here -> changelog dotNetFx40_Full_x86_x64 --> Download vcredist_x886 --> Download CDM 2.12.36.4 Certified. --> Download To ensure the Vinci Software runs on Window...

IOMOD Firmware version 2 Downloads Only the Modbus RTU protocol is fully tested for this firmware version. IEC 60870-5-101 and IEC 60870-5-103 are still being tested and will be fully tested in future versions.  IOMOD Utility -> Download Firmware version 2 ...

WCCLite firmware version 1.11.0 (released 21/03/2025) To upgrade WCC Lite from older versions (up to 1.9.3), the user must first upgrade to 1.10 or unzip the firmware file twice to get a .bin file. This is because all firmware files are now signed. RTU firm...

IEC 60870-5-103 is a protocol for power system monitoring and controlling. Mostly used for communication between protection devices and devices of a control system in a substation (RTU) over fiber optics. Info about protocol Telegram Structure Telegram fo...

IEC 60870-5-101 is a protocol for power system monitoring and controlling. Mostly used for communication between substations and control centers over radio. Info about protocol Telegram Structure Teleram format with fixed length Telegram format with va...

Modbus is a communications protocol originally published by Modicon (now Schneider Electric) in 1979 for use with its programmable logic controllers (PLCs). Simple and robust, it has since become a de facto standard communication protocol, and it is now a comm...

Menu Bar File New - Create new .vinci file. Open - Open existing .vinci file. SaveAs - Save current file with a different name. Exit - Close the program. Tags Import - import previously saved .csv file. Export  - export currently configured T...

Placement Filter and Format buttons can be found at the bottom right side of the Console window, as demonstrated in the picture below Filter Filtering refers to comparing a list of records against specific criteria and then hiding the records that don’t m...

Vinci Hardware Software Installation The software can be downloaded from this link. After downloading the .exe installation file run it. The setup will open. To install The Vinci Software accept the license agreement and click next. Select Installation D...

Vinci protocol analyzer is an industrial communication tool for commissioning engineers and developers to simulate, analyze and test communication systems that use the IEC 60870-5 and Modbus protocols. With this software, you can monitor the communication chan...

WCC Lite is based on OpenWRT operating system. OpenWrt is described as a Linux distribution for embedded devices. WCC Lite has same functionality as Linux OS including user management. Basic configuration on WCC Lite can be done using web based frontend. More...

Introduction IOMOD HT is used for temperature and humidity data monitoring over Modbus (RTU), IEC 60870-5-103 or IEC 60870-5-101. Advanced version of the device is also capable of switching relays automatically (thermostat function) as configured. Features ...

Introduction IOMod 8AI is a compact-sized stand-alone Modbus (RTU) or IEC-60870-5-103 analog input controller. IOMod can be used for industrial applications where digital signaling is used and robust communication is needed. IOMod is an ideal solution for app...

Initial Setup All you need to do to set up is to be connected to a network from which the SCADA is reachable. Standard settings in the Vinci software are for an RJ-45 cable, but it is configurable using the Hardware tab. When you're connected to the network...