Skip to main content

Recently Updated Pages

Enable Internet or WAN for connected devices

In order to enable connected devices communication through the router it is needed to enable Masq...

WAN IP Setup

Description One o the first steps in RTU/Datalogger setting up is to prepare connection to inter...

Connect to WCC Lite

In order to connect to the WCC Lite: Power up the WCC Lite Once the WCC Lite boots up, plug an...

Distributed control application

IEC 64199 standard introduced requirements for a distributed control. This means that multiple de...

Generating and uploading FORTE logic file

After the PLC design is finished and debugged, such design can be compiled into FBOOT file and up...

Mathematical expressions

Introduction Signal value might require some recalculation or signal update prior to being sent....

IEC 60870-5-104

Introduction IEC 60870-5-104 protocol (in short IEC 104) is a part of IEC Telecontrol Equipment ...

Services

Introduction Services tab shows the services of the device and contains the following subsection...

WCC Lite interfaces

WCC lite supports various interfaces to be acquire data and control external circuitry. That incl...

Installing the WCC Lite

Mounting To mount the device:1. Secure the top of the mounting clip onto a DIN rail.2. Push the ...

WCC Lite status indication and control

Status indication Reset button The reset button is located on the front panel of WCC Lite, to...

Logout

To log out of the device graphical user interface a logout button in interface’s upper right co...

WCC Lite Tags

Single point Commonly used in storing digital states single point values have only one bit of in...

Status

Overview System System section in status tab shows basic information about current status of th...

Protocol HUB

Full Protocol HUB section is only available on “Cloud gateway” firmware type.For “RTU” firmware t...

IOMOD with Modbus RTU configuration

IOMOD with IEC 60870-5-103 configuration

WCCLite specifications

Uploading configuration

As of WCC Lite version v1.4.0 there are three separate ways to import the configuration: import a...

Device configuration

Protocol HUB uses configuration in excel file format. Each sheet represents a specific part of co...