Recently Updated Pages
Isolated Mode Examples
In this mode, THE VINCI EXPERT works as protocol master / slave. Everything that comes to A side,...
Features
Front face ...
Overview
THE VINCI EXPERT is the best choice for applications requiring the highest versatility of physica...
Driver installation
Device requires USB drivers to work as virtual com port. First-time connection between device and...
Signals sheet
Signals sheet contains all signals linked to devices. Each signal is defined in single row. Signa...
IEC 61499
Introduction IEC 61499-1 defines the architecture for distributed systems. In IEC 61499 the cycl...
Distributed control application
IEC 64199 standard introduced requirements for a distributed control. This means that multiple de...
Generating and uploading FORTE logic file
After the PLC design is finished and debugged, such design can be compiled into FBOOT file and up...
Services
Introduction Services tab shows the services of the device and contains the following subsection...
WCC Lite status indication and control
Status indication Reset button The reset button is located on the front panel of WCC Lite, to...
Logout
To log out of the device graphical user interface a logout button in interface’s upper right co...
WCC Lite Tags
Single point Commonly used in storing digital states single point values have only one bit of in...
Status
Overview System System section in status tab shows basic information about current status of th...
Protocol HUB
Full Protocol HUB section is only available on “Cloud gateway” firmware type.For “RTU” firmware t...
Uploading configuration
As of WCC Lite version v1.4.0 there are three separate ways to import the configuration: import a...