Recently Updated Pages

Devices sheet contains all devices to be configured on the gateway. Each row represents one devic...

IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontr...

General SMS sender is a service that lets user configure WCC Lite to send SMS on a set tag trigg...

The firmware of the WCC Lite features a built­in API which is accessible via the web interface. A...

SNMP (Simple Network Management Protocol) is an internet­standard protocol for managing devices o...

Introduction IEC 62056 is a set of standards for electricity metering data exchange by Internati...

System Processor ARM CPU (AR9331, 400MHz) Memory 16 MB Flash/64 MB DDR2 RAM...

To log out of the device graphical user interface a logout button in the interface’s upper righ...

System The system tab includes various properties, configurations, and settings of the system an...

Services tab shows the services of the device and contains the following subsections: Services...

The page shows information about current interface status, its configurations, provides various...

Overview System System section in the status tab shows basic information about the current stat...

WCC Lite comes with a static network configuration with its IP set to 192.168.1.1. For initial se...

It provides the main navigation through the website. Contains the following sections: PROTOC...

Protocol HUB section stores configuration for every connected device. You can configure it by imp...

Figure 1: Front panel status indication

Single point Commonly used in storing digital states single point values have only one bit of in...

In order to get the WCC Liteup and running, a PC/Mac is required, capable of running a web browse...

System Processor ARM CPU (AR9331, 400MHz) Memory 16 MB Flash/64 MB DDR2 RAM Wire...

This document is intended to act as a user manual and explain WCC Lite usage in detail. It is exp...