Recently Updated Pages
8.5 System
System The system tab includes various properties, configurations, and settings of the system an...
1 Overview
This document is intended to act as a user manual and explain WCC Lite usage in detail. It is exp...
8.2 Site layout
It provides the main navigation through the website. Contains the following sections: PROTOC...
8.1 Initial Setup
WCC Lite comes with a static network configuration with its IP set to 192.168.1.1. For initial se...
8.3 Protocol Hub
Protocol HUB section stores configuration for every connected device. You can configure it by imp...
7 Tags
Single point Commonly used in storing digital states single point values have only one bit of in...
20.3 Example project
The best way to understand basics of 4Diac and WCC Lite collaboration is through an example proje...
20.4 Configuring data endpoints
To use WCC Lite as a programmable logic controller, it needs to be configured in a particular way...
20.7 Distributed control application
IEC 64199 standard introduced requirements for a distributed control. This means that multiple de...
19 WCC Lite internal signals
Overview The WCC Lite contains several internal data points for readout and control which can be...
18.4 Uploading configuration
As of WCC Lite version v1.4.0, there are three separate ways to import the configuration: import ...
16.4 Delta
Overview Delta protocol is used to communicate with Delta inverters over serial communication. ...
16.5 GINLONG
Overview Ginlong protocol is used to communicate with Ginlong inverters over serial communicatio...
16.6 Kaco
Overview This protocol is meant to be used by inverters that convert the DC power generated by t...
16.6 KOSTAL
Overview Kostal protocol is used to communicate with Kostal devices over serial communication. ...
16.7 POWERONE
Overview PowerOne protocol is used to communicate with Aurora inverters over serial communicatio...
16.8 SMA NET
Overview SMA Net can transfer SMA Data, TCP/IP and many more telegrams due to its multiprotocol...
16.9 SOLPLUS
Overview Solplus protocol is used to download inverter data from Solplus inverters using a HTTP ...
20.1 IEC 61499
IEC 61499-1 defines the architecture for distributed systems. In IEC 61499 the cyclic execution m...
20.5 Debugging an IEC 61499 application
After a project has been built and binded to an existing Excel configuration, a user would normal...