Recently Updated Pages
17.1 DLMS/COSEM
Introduction IEC 62056 is a set of standards for electricity metering data exchange by Internati...
10 SNMP
SNMP (Simple Network Management Protocol) is an internet standard protocol for managing devices ...
17.3 Elgama
Overview Elgama protocol is used for communications with Elgama elektronika electricity meters. ...
Mathematical functions
Signal value might require some recalculation or signal update prior to being sent. Understandabl...
14.4 IEC 60870-5-103 Master
The IEC 60870-5-103 protocol is a companion standard for the informative interface of protection ...
20.4 Configuring data endpoints
To use WCC Lite as a programmable logic controller, it needs to be configured in a particular way...
20.3 Example project
The best way to understand basics of 4Diac and WCC Lite collaboration is through an example proje...
IOMod Modbus RTU Slave firmware change-log
Elseta IOMod series devices support's Modbus RTU Slave protocol. This firmware can be used for I...
IOMod IEC 60870-5-101 Slave firmware change-log
Elseta IOMod series devices support's IEC 60870-5-101 Slave protocol. This firmware can be used ...
IOMod IEC 60870-5-103 Slave firmware change-log
Elseta IOMod series devices support's IEC 60870-5-103 Slave protocol. This firmware can be used ...
20.7 Distributed control application
IEC 64199 standard introduced requirements for a distributed control. This means that multiple de...
20.6 Generating and uploading FORTE logic file
After the PLC design is finished and debugged, such design can be compiled into FBOOT file and up...
20.5 Debugging an IEC 61499 application
After a project has been built and binded to an existing Excel configuration, a user would normal...
3 Technical information
System Processor ARM CPU (AR9331, 400MHz) Memory 16 MB Flash/64 MB DDR2 RAM Wire...
1 Overview
This document is intended to act as a user manual and explain WCC Lite usage in detail. It is exp...
18.3 Mathematical functions
Signal value might require some recalculation or signal update prior to being sent. Understandabl...
Modbus RTU to IEC104 protocol conversion
Description This article describes WCC Lite configuration steps to enable Modbus TCP protocol co...
IEC 61850 interoperability with IEC 104
IEC 61850 Server WCC Lite can act as a IEC 61850 server to serve data to remote SCADA systems. F...
Single point to double point and double point to single point information
Single point to double point information For this example of changing single point information t...
Firmware update
To upgrade the FW of wcc lite, in the web interface go to system -> backup/flash firmware and upl...