Search Results

Copyrights and trademarks Elseta is UAB “Elseta” trademark that identifies UAB “Elseta” manufactured products. All of the products copyright belongs to "Elseta”. These documents and the product properties can not be changed without company “Elseta'” knowledge ...

To use WCC Lite as a programmable logic controller, it needs to be configured in a particular way. The PLC functionality of the WCC Lite only allows for the use of data which has been configured in the Excel configuration spreadsheet. This has been done for se...

After the PLC design is finished and debugged, such design can be compiled into FBOOT file and uploaded to one or multiple devices to be used in production. As application being debuggged is not automatically considered as a default application, one should be ...

IEC 64199 standard introduced requirements for a distributed control. This means that multiple devices can change information between them and make their own decisions based on the data they receive from other sources. This enables distributed applications bet...

Description This article describes WCC Lite configuration steps to enable Modbus TCP protocol conversion to IEC 104. First steps Before you begin, make sure you have completed all physical installation work according to the manufacturer's installation ins...

IOMod series devices has USB port for IO module configuration. Due to be accessible on some of Windows OS devices please find attached drivers.  IOmod-USB-driver-V-COM<- download link.

Device requires USB drivers to work as virtual com port. First-time connection between device and computer could result in “Device driver software was not successfully installed” error.  Device driver error message User then manually installs drivers by sele...

 Front face                                                                                                                                                  Back face   Power on indicator.                                                                   ...

THE VINCI EXPERT is the best choice for applications requiring the highest versatility of physical serial communication interfaces. Commissioning engineers, system integrators and product developers will especially appreciate the possibility to perform wiring ...

When you connect THE VINCI EXPERT to a computer a normally operating system in hardware should find 4 Virtual Com Ports (VCP). First Com port for communication with SIDE A and Second for communication with SIDE B, as described in the Function scheme. Other VCP...

Fiber Optic LIGHT ON/OFF mode button – by pressing this button you can easily convert Fiber Optical channel from Light Off mode to Light On mode. The Light On mode is indicated by a Light On indicator. Fiber optic power can be measured in software. Laser radi...

THE VINCI EXPERT can be used in two different modes: Isolated and Non-Isolated. Fig.1.1 • Isolated mode allows user to virtually split device into two, and then use each side separately. This mode is useful when user communicates with devices separately and ...

In this mode, THE VINCI EXPERT works like analyzer / probe. Everything that comes to A side, comes out of B side and in reverse – what comes in B side, goes to A side. Fig.1.2. In this example, THE VINCI SOFTWARE works as master and device connected to THE V...

Fig.1.7. General   Dimensions D91 x 19.6 mm Case 6-seriesAluminum Weight 138g PC USB Connection Mini USB     Electrical characteristics   Power supply via USB 5V Max. operating current Imax=460mA Min. operating current I...

• Easily change settings through software; • Measure laser power; • Change RS232 pinout; • Save settings to a file; • Analyze protocols and monitor data; • Upload new firmware into THE VINCI EXPERT device.

• THE VINCI EXPERT - serial interface protocol analyzer and universal serial interface converter.• Hard case with figure cut foam for connectors and a pocket for wires. All possible connections and wires are attached: • 2 x 1 meter long cable RJ-45 to RJ-45 •...

In this mode, THE VINCI EXPERT works as protocol master / slave. Everything that comes to A side, comes out of A side and in reverse – what comes in B side, goes to B side. A side is isolated from B side. Fig.1.5. Now, there is two instances of THE VINCI SOFT...

Description This article describes how to log packets using tcpdump. Installing tcpdump Before starting, you need to install required packages. Tcpdump and Libpcap. These packages can be found attached to the article. To install, you need to upload the pac...

Introduction IEC 61850 is an international standard defining communication protocols for intelligent electronic devices at electrical substations. It is a part of the International Electrotechnical Commission’s (IEC) Technical Committee 57 reference architect...

Introduction IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontrol (supervisory control and data acquisition) in electrical engineering and power system automation applications. Part 5 provides a communication pro...