16 Specific protocols
– Aurora (ABB PV inverters protocol)
– PowerOne (ABB PV inverters protocol)
– SMA Net (SMA PV inverters protocol)
– Kaco (Kaco PV inverters protocol)
– Ginlong (Ginlong PV inverters protocol)
– Solplus (Solutronic AG PV inverters protocol)
– ComLynx (Danfoss PV inverters protocol)
– Delta (Delta PV inverters protocol)
– Windlog (Wind sensors from RainWise Inc.)
– Vestas ( Wind turbines protocol)
– VBus.
16.1 At command
Overview At command protocol is used for communications with AT Commands. Configuration At com...
16.2 Aurora
Overview The Aurora Protocol is a link layer communications protocol for use on point-to-poi...
16.3 COMLYNX
Overview Comlynx protocol is used to communicate with Comlynx inverters over serial communicatio...
16.4 Delta
Overview Delta protocol is used to communicate with Delta inverters over serial communication. ...
16.5 GINLONG
Overview Ginlong protocol is used to communicate with Ginlong inverters over serial communicatio...
16.6 Kaco
Overview This protocol is meant to be used by inverters that convert the DC power generated by t...
16.7 POWERONE
Overview PowerOne protocol is used to communicate with Aurora inverters over serial communicatio...
16.8 SMA NET
Overview SMA Net can transfer SMA Data, TCP/IP and many more telegrams due to its multiprotocol...
16.9 SOLPLUS
Overview Solplus protocol is used to download inverter data from Solplus inverters using a HTTP ...
16.10 VBUS
Overview Vbus is a protocol used for communication with solar station automation via serial link...
16.11 VESTAS
Overview Vestas is a protocol used for communication with solar station automation via serial li...
16.12 Windlog
Overview Windlog protocol is used for communications with the Windlog data logger. Configuratio...
16.13 M-Bus
Overview M-Bus or Meter-Bus is a protocol for the remote reading of water, gas, or electricity m...
16.14 KOSTAL
Overview Kostal protocol is used to communicate with Kostal devices over serial communication. ...