11 SMS sender

General

SMS sender is a service that lets user configure WCC Lite to send SMS on a set tag triggers.

SMS sender functionality is available since firmware version v1.5.4, of WCC Lite.

Configuring SMS sender

To configure WCC Lite to use SMS sender user must fill in the needed parameters in Excel configuration. These parameters are shown in the tables below. 

SMS sender parameters for Devices tab:

Parameter	Type	Description	Required	Default value (when not specified)	Range
					Min	Max
name	string	User-friendly device name	Yes
description	string	Description of the device	No
device_alias	string	Device alias to be used in configuration	Yes
enable	boolean	Enabling/disabling of a device	No	1	0	1
protocol	string	Selection of protocol	Yes		SMS sender
host	array	List of phone numbers to send SMS to, separated by space.	Yes

SMS sender parameters for Signals tab:

Parameter	Type	Description	Required	Default value (when not specified)	Range
					Min	Max
signal_name	string	User-friendly signal name	Yes
device_alias	string	Device alias from a Devices tab	Yes
signal_alias	string	Unique signal name to be used	Yes
source_device_alias	string	device_alias of the source device	No
source_signal_alias	string	source_alias of the source signal	No
enable	boolean	Enabling/disabling of a signal	No	1	0	1
log	integer	Enable logging in event log	No	0	0
job_todo	string	Specific SMS sender tag type	Yes		send-sms, device-control, device-status
tag_job_todo	string	SMS sender tag for send-sms: text message	Yes
trigger	string	Trigger expression for the SMS to be sent	No (Only for send_sms)	value!=0

To configure SMS sender, 3 types of signals are mandatory. These values should be written inside the job_todo field for each signal:

• send-sms - This signal takes value from the provided source_signal_alias field and checks if the value evaluates as true against the trigger field. If its true, the SMS sender will send the text from the tag_job_todo field to the specified phone numbers. 
• device-control - This signal controls if the SMS sender is enabled or disabled. Its tag_job_todo parameter should be set to enable. It takes value from the source_signal_alias field and evaluates it against the trigger field. If the trigger is evaluated as true, the SMS sender will be enabled, otherwise it will disable the SMS sender.
• device-status - This signal indicates if the service is enabled or not. Its tag_job_todo parameter should be set to enabled. 

Trigger expressions can be configured with basic comparison operators:

• Less than <
• Greater than >
• Less than or equal to <=
• Greater than or equal to >=
• Equal ==
• Not equal !=

Example configuration of SMS sender (Signals tab):

Configuration --> Download