Advanced Search
Search Results
16 total results found
Network
The page shows information about current interface status, its configurations, provides various interface, network properties configuration capabilities and contains the following subsections:• INTERFACES: shows information about current interface status, al...
Services
Introduction Services tab shows the services of the device and contains the following subsections: Services tab shows the services of the device and contains the following subsections: TELEMETRY AGENT: device telemetry sending to a remote server; IPSEC:...
Logout
To log out of the device graphical user interface a logout button in interface’s upper right corner should be pressed. A user is automatically disconnected after ten minutes of inactivity. This ensures that the device would not be suspect to any deliberate d...
WCC Lite specifications
Features • 1xRS485/232; 1xRS485; 2xEthernet• 1 x Digital Input• 1 x Relay output• WIFI, 2G/3G/4G(LTE) integrated communication• 2 SIM card modem• PLC logic• Internal memory: SD card• RTC clock and NTP server/client• Hardware Watchdog• Alarm management• User ...
WCC Lite status indication and control
Status indication Reset button The reset button is located on the front panel of WCC Lite, to access it, remove a transparent front panel cover. Different time lengths of button pressing call different behaviour. Pressing time Description Indication ...
Installing the WCC Lite
Mounting To mount the device:1. Secure the top of the mounting clip onto a DIN rail.2. Push the bottom of a device forward to fix the clip in place. To dismount the device:1. Pull red coloured clip downwards (found at the bottom side of the DIN rail).2. Pull...
WCC Lite interfaces
WCC lite supports various interfaces to be acquire data and control external circuitry. That includes two serial port interfaces, relay output, digital input and external cellular connection antennae. Serial port interfaces WCC Lite WCC Lite has 2 serial por...
WCC Lite Tags
Single point Commonly used in storing digital states single point values have only one bit of information. The value of such tags can be either one or zero. On the internal web of WCC Lite states of this type of tags are shown in colored boxes with customisa...
Connect to WCC Lite
In order to connect to the WCC Lite: Power up the WCC Lite Once the WCC Lite boots up, plug an ethernet cable into the ETH0 port. Connect the other end of the cable to the Ethernet interface of your PC/Mac Make sure DHCP is enabled on your Ethernet interf...
IOMOD models and types
The IOmod series comprises devices that incorporate various input and output modules. These modules all operate using one of three firmware versions (except for 4Cs4Vs, which uses one of two). These firmware versions serve to distinguish the communication prot...
USB Drivers
IOMod series devices has USB port for IO module configuration. Due to be accessible on some of Windows OS devices please find attached drivers. IOmod-USB-driver-V-COM<- download link.
Driver installation
Device requires USB drivers to work as virtual com port. First-time connection between device and computer could result in “Device driver software was not successfully installed” error. Device driver error message User then manually installs drivers by sele...
IOMod IEC 60870-5-101 Slave firmware change-log
Elseta IOMod series devices support's IEC 60870-5-101 Slave protocol. This firmware can be used for IOMod series devices: IOMod 8DI8DO v1.x, IOMod 16DI v1.x, IOMod 8AI v1.x, IOMod 4RTD v1.x, IOMod HT v1.x This version does not support IOMod 4Cs4Vs model. ...
IOMod IEC 60870-5-103 Slave firmware change-log
Elseta IOMod series devices support's IEC 60870-5-103 Slave protocol. This firmware can be used for IOMod series devices: IOMod 8DI8DO v1.x, IOMod 16DI v1.x, IOMod 8AI v1.x, IOMod 4RTD v1.x, IOMod HT v1.x This version does not support IOMod 4Cs4Vs model. ...
IOMod Modbus RTU Slave firmware change-log
Elseta IOMod series devices support's Modbus RTU Slave protocol. This firmware can be used for IOMod series devices: IOMod 8DI8DO v1.x, IOMod 16DI v1.x, IOMod 8AI v1.x, IOMod 4RTD v1.x, IOMod HT v1.x This version does not support IOMod 4Cs4Vs model. ...
The Vinci Software changelog
v.3.2.2.2 - Software update 2024 April 18. Small bugs solved. v3.2.1.1 - Software release. 2024 April 4. v3.2.1.1 changelog NEW: you can use domain name instead of IP in TCP protocols NEW: print modbus exceptions FIX: IEC 101/104 float value parsing ...