19 SOLPLUS
Overview
Solplus protocol is used to download inverter data from Solplus inverters using a http client.
Configuration
Solplus parameters for Device tab
| Parameter |
Type |
Description |
Required |
Default value (when not specified) |
Range |
|
|
Min |
Max |
|||||
| name | string | User-friendly device name | Yes |
|
|
|
| description | string | Description of a device | No |
|
|
|
| device_alias | string | Alphanumeric string to identify a device | Yes | |||
| enable | boolean | Enabling/disabling of a device | No | 1 | 0 | 1 |
| protocol | string | Protocol to be used. | Yes |
Solplus |
||
| scan_rate_ms | integer | All reads and writes will be executed within thetimeframe in miliseconds | No | 10000 |
|
|
| poll_delay_ms | integer | Minimum time delay in miliseconds to wait before sending any data on port. | No | 200 |
|
|
| timeout_ms | integer | Timeout of waiting for incoming request in miliseconds | No | 2500 | 0 | 60000 |
| url | string | HTTP server location URL | Yes | |||
Solplus parameters for Signals tab
| Parameter | Type | Description | Required |
Default value (when not specified) |
Range |
|
| signal_name |
string |
User-friendly signal name |
Yes |
|
|
|
| device_alias |
string |
Device alias from a Devices tab |
Yes |
|
|
|
| signal_alias |
string |
Unique alphanumeric name of the signal to be used |
Yes |
|
|
|
| enable |
boolean |
Enabling/disabling of an individual signal |
No | 1 |
0 |
1 |
| log |
integer |
Enable logging in event log |
No | 0 |
|
|
| number_type | string | Type of a number (FLOAT, DOUBLE, DIGITAL, etc.) | Yes | |||
| job_todo |
string |
Tag job as single or multiple comma separated OBIS codes |
Yes |
|
|
|
| tag_job_todo | string | Tag sub job | Yes | |||
| pulse_short_time_ms | integer | Time interval for short output pulse to stay active | No | |||
| pulse_long_time_ms | integer | Time interval for long output pulse to stay active | No | |||