17.3 Elgama

Overview

Elgama protocol is used for communications with Elagama elektronika electricity meters.

Configuration

Available meter types (use number only):

• 0 ­ EPQM/LZQM
• 1 ­ EPQS
• 2 ­ GAMA300
• 3 ­ GAMA100
• 4 ­ ITS cl

Elgama parameters for Device tab

Parameter	Type	Description	Required	Default value (when not specified)	Range
					Min	Max
name	string	User-friendly device name	Yes
description	string	Description of a device	No
device_alias	string	Alphanumeric string to identify a device	Yes
enable	boolean	Enabling/disabling of a device	No	1	0	1
protocol	string	Protocol to be used.	Yes		Elgama
device	string	Communication port	Yes		PORT1	PORT2
baudrate	integer	Communication speed, bauds/s	No	9600	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,115200
serial_close_delay	integer	Delay before closing serial port in milliseconds	No	400
timeout_ms	integer	Timeout of waiting for incoming request in milliseconds	Yes
id	integer	Meter serial number	Yes
meter_model	integer	Meter type (See available meters above)	Yes		0	4
use_time	boolean	Use system/meter (0/1) time (Default: 0)	No	0	0	1

Elgama parameters for the Signals tab

Parameter	Type	Description	Required	Default value (when not specified)	Range
					Min	Max
signal_name	string	User-­friendly signal name	Yes
device_alias	string	Device alias from a Devices tab	Yes
signal_alias	string	Unique alphanumeric name of the signal to be used	Yes
enable	boolean	Enabling/disabling of an individual signal	No	1	0	1
log	integer	Enable logging in event log	No	0
number_type	string	Type of number (FLOAT, DOUBLE, DIGITAL, etc.)	Yes
job_todo	string	Tag job as single or multiple comma separated OBIS codes	Yes
tag_job_todo	string	Tag sub job	Yes