Search Results

Introduction IEC 61107, currently IEC 62056-21, was an international standard for a computer protocol to read utility meters. It is designed to operate over any media, including the Internet. A meter sends ASCII (in modes A..D) or HDLC (mode E) data to a near...

Overview Vbus is a protocol used for communication with solar station automation via serial link. Configuration VBUS parameters for Device tab Parameter Type Description Required Default value (when not specified) Range Min ...

Configuring datapoints (slave) The IEC 60870­-5­-101 Slave in WCC Lite has to be configured in Excel. This configuration contains two Excel sheets where parameters must be filled in ­Devices and Signals. IEC 60870-­5-­101 slave parameters for Devices tab ...

The IEC 60870-­5-­101 protocol is a companion standard for power system monitoring, control associated communications for telecontrol, teleprotection and associated telecommunications for electric power systems. Standard IEC 60870-­5­-101 was prepared by IEC T...

IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontrol (supervisory control and data acquisition) in electrical engineering and power system automation applications. Part 5 provides a communication profile for sendi...

Overview Kostal protocol is used to communicate with Kostal devices over serial communication. Configuration Kostal parameters for the Device tab Parameter Type Description Required Default value (when not specified) Range Min ...

Overview M-Bus or Meter-Bus is a protocol for the remote reading of water, gas, or electricity meters. M-Bus is also usable for other types of consumption meters, such as heating systems or water meters. The M-Bus interface is made for communication on two wi...

Overview Windlog protocol is used for communications with the Windlog data logger. Configuration Windlog parameters for the Device tab Parameter Type Description Required Default value (when not specified) Range Min Max ...

Overview Vestas is a protocol used for communication with solar station automation via serial link. Configuration Vesta's parameters for the Device tab Parameter Type Description Required Default value (when not specified) Range ...

Overview Solplus protocol is used to download inverter data from Solplus inverters using an HTTP client. Configuration Solplus parameters for Device tab Parameter Type Description Required Default value (when not specified) Range ...

Overview Elgama protocol is used for communications with Elgama elektronika electricity meters. Configuration Available meter types (use number only): 0 ­ EPQM/LZQM 1 ­ EPQS 2 ­ GAMA300 3 ­ GAMA100 4 ­ ITS cl Elgama parameters for Device tab ...

Overview SMA Net can transfer SMA Data, TCP/IP and many more telegrams due to its multi­protocol capability. Thus, it is the preferred telegram frame in case of new developments. Configuration SMA NET parameters for the Device tab Parameter Type De...

Overview PowerOne protocol is used to communicate with Aurora inverters over serial communication. Serial communication parameters (baudrate, parity, etc.) are handled automatically by the protocol. Configuration PowerOne parameters for the Device tab ...

Overview This protocol is meant to be used by inverters that convert the DC power generated by the photovoltaic (PV) modules into AC power and feed this into the power grid. This protocol handles serial communication parameters (baudrate, databits, stopbits,...

Overview Ginlong protocol is used to communicate with Ginlong inverters over serial communication. GINLONG parameters for Device tab: Parameter Type Description Required Default value (when not specified) Range Min Max ...

Overview Delta protocol is used to communicate with Delta inverters over serial communication. Configuration Delta parameters for the Device tab Parameter Type Description Required Default value (when not specified) Range Min ...

Overview Comlynx protocol is used to communicate with Comlynx inverters over serial communication. Comlynx parameters for Device tab: Parameter Type Description Required Default value (when not specified) Range Min Max ...

Overview The Aurora Protocol is a link layer communications protocol for use on point­-to-­point serial links. Itis intended for use in high­speed (gigabits/second and more) connections internally in a computeror an embedded system. It uses either 8b/10b enco...

Overview At command protocol is used for communications with AT Commands. Configuration At command parameters for the Device tab Parameter Type Description Required Default value (when not specified) Range Min Max nam...

The IEC 60870-5-103 protocol is a companion standard for the informative interface of protection equipment. Standard IEC 60870-5-103 was prepared by IEC Technical Committee 57 (Power system control and associated communications). It is a companion standard for...