6.4 GSM

WCC Lite comes with an optional GSM module.
There are a few hardware configurations available: 

They are based on a mini PCI-e standard connector and are compatible with any other device. Check the label on the package for current modifications.

image-1669194279091.png

Figure 12: GSM antenna connector

Connect an antenna to the SMA connector labelled “ANT1“. Select a good antenna placement spot considering the operation environment and network coverage of your mobile provider in the area. To enable MIMO functionality for 4G (LTE) modems a second antenna should be connected to the SMA connector labelled ”ANT2”.

4G (LTE) Cat 1 version modem both antennas are used for LTE communication. In such cases, an internal WIFI antenna is used. The network can be limited in distance and speed, especially in metal-based panels.

Make sure the signal level is over -80dBm to have a stable connection to the network.


Revision #2
Created 26 January 2024 13:13:14 by Gabriele
Updated 13 June 2024 08:46:24 by Gabriele