6.3 Digital Input

With WCC Lite hardware version 1.4, a digital input functionality has been introduced. Software configuration guidelines are discussed in the WCC Lite internal signals section. It changes state when the voltage is between 12-48V (The supported range is between 10-60V). 

Input voltage 12-48 VDC (accepts 10-60V)
Protection

±60 VDC reverse polarity protection

Isolated from main logic

image-1669194223199.png

Figure 11: Signal relay connector 



Revision #3
Created 20 December 2022 11:56:41 by Gabriele
Updated 23 March 2023 14:13:36 by Tautvilis